oalib

OALib Journal期刊

ISSN: 2333-9721

费用:99美元

投稿

时间不限

( 2024 )

( 2023 )

( 2022 )

( 2021 )

自定义范围…

匹配条件: “ 程旭旭” ,找到相关结果约59256条。
列表显示的所有文章,均可免费获取
第1页/共59256条
每页显示
负Ricci曲率紧Riemann流形上第一特征值的估计

科学通报 , 1990,
Abstract: 本文在n维紧Riemann流形M上考虑下述问题—△u=λu,得到了关于具负下界Ricci曲率的流形的第一非零特征值λ_1的两种互不包含的估计,改进了文献[1]的主要结果。
完备黎曼流形上的Yamabe不变量

科学通报 , 1998,
Abstract: 在非紧完备Riemann流形上给出了Yamabe共形不变量非正的一个充分条件及其应用.
焦虑与中医体质相关性研究进展
Research Progress of the Correlation between Anxiety and Traditional Chinese Medicine Body Constitution
 [PDF]

闫东, 为平
Advances in Clinical Medicine (ACM) , 2024, DOI: 10.12677/ACM.2024.142609
Abstract: 焦虑是一种常见精神性疾病,对患者的工作或生活会产生不同程度的影响,中医体质可以昭示人体对某种致病因子的易感性或病变类型的倾向性。本文针对焦虑症的中医体质进行总结分析,从中医体质预防与调摄层面总结归纳了医家对焦虑症防治的思想和经验,为临床焦虑症的防治提供理论依据。
Anxiety is a common mental disease, which affects the patient’s work or life in different degrees. Traditional Chinese Medicine (TCM) body constitution can indicate the susceptibility of human body to certain pathogenic factors or the tendency of pathological types. This paper summarizes and an-alyzes the TCM body constitution of anxiety disorder, summarizes the doctors’ thoughts and expe-riences on the prevention and treatment of anxiety disorder from the level of TCM body constitution prevention and adjustment, and provides theoretical basis for the prevention and treatment of clinical anxiety disorder.
抗气蚀材料的设计与涂层工艺研究

武汉理工大学学报 , 2004,
Abstract: ?设计了p1731、p1732、p34213种抗气蚀涂层材料,采用等离子喷焊工艺在921钢基体上制备焊层,与1cr18ni9ti、921钢在配制的人工海水中进行振动空蚀试验。结果表明:3种涂层材料均比1cr18ni9ti、921钢抗空蚀能力提高3倍以上。同时对其中2种材料的成分组成、结构特点、sem形貌、电极电位等方面进行分析,总结了抗气蚀涂层材料优异的抗空蚀性能
Abbe瓣术式发展、手术效果评估方法及影响因素
Technique development, postoperative assessment methods, and influencing factors of Abbe flap

,石冰
- , 2015, DOI: 10.7518/gjkq.2015.01.013
Abstract: 摘要:
Abbe瓣是以下唇动脉为蒂的交叉唇瓣,它将含有下唇皮肤、肌肉及黏膜组织的全厚瓣向上旋转,用以修复上唇正中的组织缺损或瘢痕挛缩。自1898年Abbe提出这一术式并将其用于临床之后,对手术方法的改良与创新层出不穷,均旨在解决蒂部体积过大、唇部动度不佳、供区瘢痕形成等问题。手术效果的评价方法有问卷调查、等级评分系统等定性评价方法,以及以唇指数为代表的定量评价方法。影响手术效果的因素包括组织缺损的类型、下唇动脉的走行及位置、组织瓣和蒂部的大小形态等。本文就Abbe瓣的术式发展、手术效果评估方法以及手术效果的影响因素作一综述。
Abstract
光纤陀螺惯导系统扰动条件下的初始对准
Initial Alignment of Fiber Optic Gyroscope SINS with Disturbances
 [PDF]

张环, 黄湘远,
Dynamical Systems and Control (DSC) , 2013, DOI: 10.12677/DSC.2013.21002
Abstract:
针对装甲车辆上在发动机不关闭及有乘员走动、上下车等扰动条件下的光纤陀螺捷联惯导系统(SINS)初始对准技术进行了相关研究。首先通过分析SINS惯性元件的信号特征基于小波分析理论对观测信号进行降噪预处理降低外界干扰的影响;采用自适应卡尔曼滤波完成精对准过程,使之具有更好的稳定性。仿真实验表明该算法能有效提高扰动基础上的对准稳定性及精度,具有较大的工程应用价值。
The initial alignment of fiber optic gyroscope strap-down inertial navigation system (SINS) for armored ve- hicles is studied when disturbance are present, for example when the motor is running on or people are walking on the vehicle. First, based on the signal analyses of the SINS inertial instruments, the observation signals were preprocessed by wavelet transform to reduce the interference, and then the adaptive Kalman filter algorithm was improved to increase the stability of alignment. The experimental results show that this technique effectively increases the alignment accu- racy with disturbances, and the application value is obvious.
仪表板气囊静态点爆试验典型失效形式研究
Research on the Typical Failure Forms of the Instrument Panel Airbag Static Explosion Test
 [PDF]

刘博俊, , 李淑莹
Open Journal of Transportation Technologies (OJTT) , 2021, DOI: 10.12677/OJTT.2021.103019
Abstract: 针对仪表板气囊静态点爆试验过程中,仪表板表皮飞出、仪表板上体碎裂、气囊支架铰链碎裂、气囊囊袋破孔,四种典型失效形式进行分析讨论。结果表明:对于发泡仪表板,提高表皮的性能、表皮与泡沫层的粘接力,可避免表皮飞出,增加气囊支架铰链止断筋的宽度会缓解铰链断裂。对于硬质仪表板,上体存在吸能结构可降低气囊门撞碎上体的风险。增加囊袋织物密度和基布层数,会降低囊袋破孔的几率。
The instrument panel skin flying out, the instrument panel body fragmentation, the airbag bracket hinge fragmentation, and the airbag bag rupture in the instrument panel airbag static explosion test are analyzed and discussed. The results show that for the foamed instrument panel, improving the performance of the skin and the adhesion between the skin and the foam layer can prevent the skin from flying out, and increasing the width of the airbag bracket hinge stop ribs will relieve the hinge fracture. For hard instrument panels, an energy-absorbing structure on the upper body can reduce the risk of the airbag door smashing the upper body. Increasing the fabric density of the pouch and the number of base fabric layers will reduce the probability of pouch holes.
苜蓿丝氨酸蛋白水解酶及青贮时对蛋白降解作用的研究
,
草业科学 , 2011,
Abstract: ?本研究以苜蓿(Medicagosativa)绿汁发酵液形式模拟青贮的发酵过程,探讨了苜蓿中丝氨酸蛋白酶的特性及其在苜蓿青贮过程中对蛋白的降解作用。在制作苜蓿绿汁发酵液前通过添加丝氨酸蛋白水解酶抑制剂(PMSF)并设置对照组来分析其在形成非蛋白氮各组分中的作用。结果表明,苜蓿中的丝氨酸蛋白酶最适pH值为6.6,最适温度为45℃;添加5mmol/L的PMSF可以完全抑制酶活性。在苜蓿青贮的发酵过程中,与对照相比,抑制剂极显著(P<0.01)地增加了苜蓿绿汁发酵液中可溶性蛋白含量;极显著(P<0.01)降低了苜蓿绿汁发酵液中非蛋白氮各组分的含量。结果说明,在苜蓿青贮过程中丝氨酸蛋白水解酶对蛋白水解形成非蛋白氮的作用较小。
类DnaJ蛋白基因sll1384参与集胞藻PCC6803的趋光反应
,
科学通报 , 2009,
Abstract: 在集胞藻PCC6803中,基因sll1384编码的蛋白在N端含有一个DnaJ结构域,C端含有一个TPR结构域.sll1384突变株对不同温度的适应能力同野生型没有区别,但其趋光运动能力几乎丧失.将野生型sll1384基因导入突变株后,可恢复其向光运动.电子显微镜观察发现,突变株细胞表面的纤毛与野生型没有明显区别.突变株的转化效率也与野生型相同,推测Sll1384通过与其他蛋白相互作用调节集胞藻的趋光反应.这是在蓝藻中发现的第一个影响趋光反应的类DnaJ蛋白基因.
热处理对钡铁氧体空心微球的结构及静磁性能的影响
陈明,,毛?
过程工程学报 , 2008,
Abstract: 以BaCl2×2H2O和FeCl3×6H2O为基本原料,采用化学共沉淀法制得前驱溶液,并利用液相等离子高温分解法制得钡铁氧体空心微球.热处理后用X射线衍射仪、扫描电子显微镜、图像分析仪及磁性能测量手段分析空心微球的微观结构和静磁特性.结果显示,空心微球的尺寸分布在2~5mm,热处理温度从900℃升高到1100℃,晶粒形貌逐渐完善,晶粒尺寸和饱和磁化强度逐渐增大,磁饱和强度在1100℃时达到48A×m2/kg,矫顽力先增大后减小,并在1000℃达到最大值2.6′105A/m.
第1页/共59256条
每页显示


Home
Copyright © 2008-2020 Open Access Library. All rights reserved.